Boundary-type microphone picks up voices during a group talk with guests

Boundary microphone is a great option for capturing all voices in a room filled with guests such as television programs or recording meetings. Simply place the microphone on a desk and easily record multiple guests at once. The TM-90BM is a boundary-type condenser microphone that captures voices with clear sound quality.
As TM-90BM is equipped with uni-directional type condenser mic, it should be positioned where the TASCAM logo is facing towards speaking voices. In addition, it should be connected to audio interfaces such as the MiNiSTUDIO and make sure phantom power supply is ready.

Flat design with height 24mm prevents from mic sticking out during the show

As the microphone body is only 24 mm high, it is unlikely to get caught on camera or obstruct the view of guests even when placed in front of guests. Even if the mic does get caught on camera, its sleek black design makes it discrete and unlikely to distract viewers.

Proven high sound pressure design for capturing loud sounds (Up to 140dB SPL)

The design of this unit allows it to record loud sound sources during talk shows or meetings without distorting. 140 dB SPL is a volume level same as an engine of airplane.

BASS TILT switch to eliminate unwanted low frequencies

When capturing voices in a room, the low frequencies are unnecessary in general. In addition, the low frequency noise may cause difficulties for viewers to hear recorded voices. The BASS TILT switch mounted on the bottom of the unit can eliminate the low frequencies directly by switching to CUT. Please select CUT at all time for conversations.

Included hard carry case and dedicated patch cable (2.9m)

The TM-90BM comes with a handy carry case that is convenient for mic packing or portable use. It also features a dedicated connector to meet the desire of flat and compact design. The microphone comes with dedicated cable in order to connect the mic to TASCAM audio interface or mixer that has XLR balanced connector with minimum noise.

  • Back-electret condenser microphone
  • Half super cardioid (Unidirectional)
  • 9-52V phantom power supply
  • BASS TILT switch to eliminate unwanted low frequencies
  • Includes hard carry case
  • Includes dedicated patch cable(XLR male output, 2.9m)
Model Back-electret condenser microphone
Directivity Half Super Cardioid (Unidirectional)
Frequency response 50Hz - 18,000Hz
Output impedance 150Ω
Load impedance >1kΩ
Sensitivity -35dB +/-3dB (0dB=1V/Pa at 1kHz)
Max. SPL 140dB (at 1kHz=1% THD)
S/N ratio 68dB
Connector 3 pin XLR, Male(dedicated patch cable)
Phantom power 9V to 52V
Dimensions 170 (W) × 24 (H) × 81.5 (D) mm
Weight 260g (device)
Accessories Hard carry case, dedicated patch cable (converted)