TM-200SG

TM-200SG

Microfoni

SHOTGUN MICROPHONE

DESCRIZIONE
Lightweight and small form factor for maximum audio quality with minimal visual intrusion
TM-200SG

The TASCAM TM-200SG was designed to be heard, not seen. The perfect balance of audio replication and small form factor mean this microphone will be the least of your worries while shooting in the field.

Super-cardioid directivity for focused, clean audio

Frequency response

TM-200SG

Polar pattern

TM-200SG

The TASCAM TM-200SG intelligently recognizes the audio you want to capture while leaving unwanted sounds behind. Post-production is a breeze with audio captured by the TASCAM TM-200SG.

Built-in low cut filter for easy environmental noise reduction
TM-200SG

Wind and environmental hum can reduce the quality of the audio and create headaches in post-production. By utilizing the natural-sounding low-cut filter, you’re saving time downstream without cutting into vital frequencies you have captured.

Windscreen, mic clip with shock mount, and soft case included
TM-200SG

Included are essential microphone accessories - a mic clip with shoe mount, and soft protective case allowing you to set up in the field and record right away.

  • Easy to handle: compact and light weight form factor.
  • Super-cardioid directivity.
  • Built-in low-cut filter for wind or any other noise reduction.
  • Operates with +48 phantom power supply.
  • Windscreen, mic clip with shoe mount, soft case included.
Element Back Electret Condenser
Polar pattern Super-cardioid
Frequency response 30Hz - 20kHz
Sensitivity -40dB +/-3dB (0dB=1V/Pa at 1kHz)
Output impedance 200Ω +/-30% (at 1kHz)
Low-cut filter 3dB/oct at 160Hz
Output connector 3 pin XLR, Male
S/N ratio 74dB (1kHz at 1Pa)
Max. SPL 132dB (at 1kHz ≦ 1% THD)
Power 48V DC
Dimensions 23 mm (Diameter) × 153 mm (L)
Weight 53g (Microphone body only)
Included items Windscreen, Mic clip with shoe mount, Soft case, Owner’s manual (warranty included)

Frequency response

TM-200SG

Polar pattern

TM-200SG